Head of Environmental Engineering department, Surya University Director of Sustainable and Smart City research center Mar 2013 – present
Program Coordinator, Kyoto University, Japan. Bilateral program under Strategic International Cooperation Programme for Japan and Thailand (Ministry Education Japan), Graduate School of Energy Science, September 2009- present
Post Doctoral/Research Fellow, Kyoto University, Japan. Global Center of Excellence, Graduate School Energy Science, February – August 2009
Consultant, United Nations Development Programme (UNDP), Bangkok, Thailand 2008-2009
Consultant, United Nations Environment Programme (UNEP), Division of Technology, Industry and Economy, Bangkok, Thailand 2008
Engineer and Project Coordinator , Prima Desain
2004 – 2005
Field Engineer, Jaya Construction Management, Jakarta , Indonesia
2003 - 2004
Field Supervisor for building design and construction, Prima Desain
1998 - 2001
PhD in Environmental Technology, Joint Graduate School of Energy and Environment (JGSEE),
2005 – 2008 University of Technology King Mongkut (KMUTT), Bangkok, Thailand. Full scholarship from Royal Thai Government and the Asian Development Bank (ADB).
Master of Science
2001 – 2003 in Construction Management, London South Bank University, United Kingdom and Hoogeschol van Arnhem en Nijmegen, the Netherlands. Fellowship from Delta scholarship
Bachelor of Science in Civil Engineering
1995 – 2000 with major on Structural Science, University of Diponegoro, Indonesia
Dr. RUDI IRAWAN
Director of Energy
May 2015 – Present : Director of Renewable Energy and Energy Conservation Division at PT Baryon Hasta Persada. As a director of energy division in a DEPC (Design, Engineering, Procurement and Construction)
January 2011 – Present : Academic staff at Yayasan Surya Institute, Indonesia
June, 2016 – Present : Adjunct faculty at SGU (Swiss German University)
June, 2011 – March 2013 : Executive Director of International Institute for Clean Energy and Climate Change (IICECC).
Sept., 2008 – Jan., 2011 : I worked at a Japan based company, Nitto Denko Co. (http://www.nitto.com/), at a product development division
Nov., 2002 - March, 2003 – Feb., 2007: A researcher – academic staff at Nanyang Technological University in Singapore.
1988 – 2003 : Academic Staff in the University of Lampung (Universitas Lampung) in Bandar Lampung, Indonesia.
1998 – 2000 : Part time staff at Mechanical and Electronics Workshop, Armidale, NSW, Australia.
1998 – 2000 : Involved in the teaching laboratories as an instructor for biophysics laboratory, physics laboratory and optoelectronics laboratory. Department of Physics and Electronic Engineering, the University of New England, Armidale, Australia.
1993 – 1994 : Physics tutor. The University of Tennessee, Knoxville, USA.
1986 – 1988 : Involved in the teaching laboratories as an instructor for Physics Laboratory and Electronics Laboratory. Department of Physics, Gadjah Mada University (Universitas Gadjah Mada), Yogyakarta, Indonesia.
Doctor of Philosophy in Physics & Electronic Engineering
(1997-2000, awarded March 2001) (Applied Physics/Electronics/Photonics). (Title of thesis: Development of an Optical Sensor for Monitoring SF6 Dissociation in High-Voltage Discharges. This thesis was funded by the Australian Electricity Supply Industry Research Board).
Department of Physics and Electronic Engineering,
School of Physical Sciences and Engineering,
The University of New England
Armidale, NSW 2351, Australia.
Postgraduate Diploma in Geothermal Energy
(1996, awarded April 1997) Technology - utilization and production engineering.
(The topic of the final project: Design of an Electronic Pressure and Temperature Tool for a Geothermal Well).
Geothermal Institute, Faculty of Engineering-Mechanical Engineering.
The University of Auckland.
Auckland, New Zealand.
Master of Science in Physics.
(1992-1994, awarded May 1994) Department of Physics and Astronomy,
College of Liberal Arts,
The University of Tennessee, Knoxville, Tennessee, USA
Sarjana in Physics- specialized in Electronics
(1983 - 1988, awarded April 1988) and Instrumentation.
(The title of the thesis: Development of an Automatic Temperature Controller at a Certain Set Point. This thesis was sponsored PT. Sari Husada Tbk, a corporation that produces nutritional products for babies and children in Indonesia, and it was tested to the milk pasteurisation system).
Department of Physics, Electronics and Instrumentation Group,
Faculty of Mathematics and Natural Sciences,
Universitas Gadjah Mada (Gadjah Mada University). Yogyakarta, Indonesia.
BSc leading to Doctorandus
Bachelor of Science leading to Doctorandus
(1983-1986, awarded August 1986) (Sarjana) in Physics.
Department of Physics, Faculty of Mathematics and
Natural Sciences, Universitas Gadjah Mada (Gadjah Mada University), Yogyakarta, Indonesia
Dr. Dena Hendriana
Swiss German University, Serpong
Position: Head of Master Mechanical Engineering, Lecturer and Researcher
Surya University, Serpong
Position: Director of Center for Computational Fluid Dynamics / Lecturer and Researcher
Ford Motor Company, Michigan
Position: Product development Engineer / Aerodynamics
PT. Jupiter Semesta Utama, Depok, Indonesia
Small Company with its main product : supermarket equipments and automotive parts
Position: Manager of Operation and Engineering
PT. Khatulistiwa Dwi Bhakti, Jakarta, Indonesia
Small Company with its main product : Telecommunication equipments Contractor
Position: Manager of Technical
Belcan Corporation, Automated analysis division, Novi, MI
On site at DaimlerChrysler Co., Auburn Hills, MI
Scientific Laboratory – Small Vehicle Platform:
BQUAD Co., Flint, MI
On site at General Motors Co., Flint, MI
Midsize and Luxury Car Group:
Massachusetts Institute of Technology, Cambridge, MA
Allison Gas Turbine, Div. Of General Motors Co., Indianapolis, IN
Co-op Student in Centrifugal Compressor Division:
Ph.D., Massachusetts Institute of Technology, Cambridge, MA
Thesis title : A parabolic quadrilateral finite element for compressible and incompressible flow Major
: Mechanical Engineering
Master of Science, Massachusetts Institute of Technology, Cambridge, MA
Thesis title : On finite element and control volume upwinding methods for high Peclet number flows
: Mechanical Engineering
Bachelor of Science, Northeastern University, Boston, MA
: Mechanical Engineering
Ferdinand Ariesta, S.T
2016 – Now : PROJECT DIRECTOR PT. Baryon Hasta Persada
Oct 2012 – Feb 2016 : DEPUTY PROJECT MANAGER PT. Harmas Jalesveva
Dec 2010 – Oct 2012 : SENIOR PLANNER PT. Balfour Beatty Sakti Indonesia
July 2007 – Nov 2010 : PROJECT ENGINEER PT. Citramegah Karya Gemilang
Jan 2007 – July 2007 : PLANNING ENGINEER PT. Sendang Asri Kencana (Pikko Group)
Mar 2006 – Dec 2006 : PLANNING ENGINEER PT. Cakrawira Bumi Mandala (Agung Podomoro Group)
Mar 2003 – Feb 2006 : PROJECT CONTROL PT. Trimatra Jaya Persada
Sep 2000 – Mar 2003 : CIVIL ENGINEER PT. Surya Toto Indonesia
Dec 1998 – Aug 2000 : SITE SUPERVISOR CV. Prima Disain
Areas of Expertise
Managing of Integration System
Scope of Work Requirements
On Time Delivery
Cost and Quality Objective
Human Resource and Risk management
Communication and Procurement Management
Dr. Handri Santoso
EXPERT SMART SYSTEM
May 2015 – Now : Technical Specialist for Industrial Automation and Information Technology, Baryon Hasta Persada
April 2011 - Now Lecturer at Graduate program of Polytechnic State of Jakarta, and Lecturer at Undergraduate program of Pradita Institute, International University Liaison Indonesia, Surya University, Universitas Bandar Lampung
October 2008 – March 2011: Postdoctoral Researcher at Nagaoka University of Technology, Japan
June 1997 - Aug 2003: System Integration Engineer & Project Coordinator, Yokogawa Indonesia.
January - June 1997: Jobs Task: Sales Engineer
Doctor of Engineering, Dr.Eng
Nagaoka University of Technology Niigata,JAPAN Major : Information Science and Control Engineering Thesis Title : Determination of Pedestrian Attributes from Motion Imagery Monitoring Using a Soft Computing Approac
Master of Engineering
Nagaoka University of Technology Niigata,JAPAN in Mechanical Systems Engineering, M.Eng Major : Information Science and Control Engineering
Bachelor of Science, S.Si.
University of Indonesia Jakarta, Indonesia Major : Physics / Instrumentation